Pedal Electro-Harmonix Bass Clone Chorus

Pedal Electro-Harmonix Bass Clone Chorus

$26.831

12 cuotas sin interés!

15% OFF efectivo / transferencia

Consultar stock antes de comprar

1 disponibles

Detalles Adicionales

Marca

Para compras inferiores a $20000, los envíos son a cargo del comprador. Una vez realizada la compra, nos comunicaremos para coordinar el mismo.
*Las estructuras no incluyen envío gratis.

Descripción

The core circuit in the Bass Clone is nearly identical to the legendary Electro-Harmonix Small Clone, but with added features tailored to the needs of bassists. These features include a greater range of modulation depth, added bass and treble EQ controls to shape your tone, and a crossover switch to decrease the amount of low frequency modulation. The Bass Clone takes a pedal that was already a favorite of bassists and makes it the perfect compact bass chorus pedal.

– USING THE BASS CLONE –

Use the footswitch to turn on the effect. The red status LED lights to indicate that the effect is engaged. The sound you hear is a combination of dry and modulated signal.

Adjust DEPTH to set the modulation amount and turn RATE to set the modulation speed. Flip the X-OVER switch up to cut low end from the modulated half of the signal; the effect will be more subtle on lower notes. Engaging X-OVER helps you retain essential clarity and punch in your low end while maintaining shimmering modulation in your high end. BASS and TREBLE allow you to further shape the chorus tone by boosting/cutting low end and high end respectively.

WARNING: Your Bass Clone can be used with an Electro-Harmonix 9.6DC-200BI power supply (same as used by Boss® & Ibanez®: 9.6 Volts DC 200mA). The Bass Clone draws 15mA at 9VDC with a center negative plug. Using the wrong adapter or a plug with the wrong polarity may damage your Bass Clone and void the warranty.

– CONTROLS, I/O JACKS, POWER –

Footswitch & Status LED –The red LED illuminates when the effect is engaged. The status LED glows brightly to signal that all operational voltages are satisfactory. The LED will not light if the Bass Clone is bypassed. Press the footswitch to toggle between effect on and true bypass mode.

DEPTH Knob – Controls the amount of modulation.

RATE Knob – Controls the speed of modulation.

BASS Knob – Boosts or cuts low end from the dry half of the effect signal. No boosting or cutting at 12 O’clock.

TREBLE Knob – Boosts or cuts high end from the mixed effect signal. No boosting or cutting at 12 O’clock.

X-OVER – Cuts low end from modulated half of the signal when switch is facing up.

INPUT Jack – Plug your instrument or the output of another effects pedal into this ¼” jack. The input impedance is 2.2MOhm.  The battery is drained when a cable is plugged into this jack, regardless of bypass state.

AMP Jack – The AMP jack outputs the Bass Clone’s audio signal. The output impedance is 1KOhm.

9V Power Jack – The Bass Clone accepts 9V Batteries, and can also be powered from an Electro-Harmonix 9.6DC-200 power supply. Plug the output of the AC adapter into the 9V power jack located at the top of the Bass Clone. The Bass Clone draws 15mA at 9VDC with a center negative plug. The Bass Clone accepts Boss® and Ibanez® style AC Adapters capable of delivering at least 50 mA.

¿Alguna consulta?